How to make a simple pen leash for the Ugee P50S tablet pen

How to make a ‘pen leash’ for the Ugee P50S tablet pen:

After my recent problems with damaged pens for the Ugee 1910b tablet monitor, I purchased a new pen. It solved all the problems I’d had with the old pens, and so I wanted to ensure the new pen could not fall on the floor and be damaged. To do this I made a simple but effective “pen leash” or “pen necklace”. Here’s how to do the same.

1. Take the long cap from the top of the popular Crayola Mini-Marker. These are widely and very cheaply available for kids in budget stationary shops and large supermarkets, and you can probably also get them via eBay. Its cap has a perfect snug grip on the top of a Ugee P50S. Snug and firm, but easy to remove.

2. No need to drill holes in the cap for a chain. Find an old long bootlace, of the Doctor Martens or hiking boot type, with the usual crimped tubular plastic-covered lace-ends. These small lace-ends can be jammed very snugly and firmly into the ventilation slots in the top of the Crayola pen cap.

3. The cap fits and grips firmly onto the end of the Ugee P50S. But not so firmly you’ll never get it off again to charge the pen (the USB cable’s charging hole connector is at the top of the pen).

IMPORTANT: To detach the cap once it’s on firmly, hold the top bit of the pen marked “Ugee”, then gently pull the cap off. Do not hold the main pen body while doing this, because the detachable top part of the pen can itself be pulled off in this way.

4. You now have a simple ‘pen leash’ which you can hang around your neck, and which will prevent your pen from being dropped. Dropped either through fumbling, or being put down and then rolling or being brushed off the desk.

The balance of the pen in the hand is only minimally affected, due to the lightness of the cap and lace. The softness of the lace means that it won’t cause wear-damage on your tablet or cause an annoying rattling noise like a metal chain would. If, after a while, the lace becomes grubby then it can be easily replaced.

Since the pens come in a pack of multiple colours, as do boot laces, you can have various colour combinations to suit your taste.

Advertisements

One thought on “How to make a simple pen leash for the Ugee P50S tablet pen

  1. Pingback: Installing the Ugee 1910b – a 10-step quickstart guide | Sketchbook Pro and 2D digital art

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s